Must have experience on: 1) Horizontal Boring Mills, HBM’s will have travel that are in the range of X - 500”, Y - 250”, Z - 50” and W - 65” they will also have turn tables that are about 10’ square with a load capacity of 100 tons. 2) Vertical Turning Centers, VTC’s will have tables that are roughly 80” in diameter with a 20 ton table capacity. X total travel will be about 160” and Z will have 80” of travel. 3)Minimum of 6-Years in Inside Machine Shop Required Skills: 1. Safety orientated 2. Familiar with Numerical Controlled Processes, Manual Data Input, Tooling Offsets, Conversation Controllers, etc. 3. Operate Manual and/or NC machines such as: lathes, mills, horizontal & vertical machining centers, EDMs, etc. 4. Experience with controllers such as: Fanuc, Siemens, Acramatic, Cincinnati-Milacron, etc. 5. Familiar with the use of precision measuring instruments: outside/inside micrometers, depth mics, verniers, etc. 6. Familiar with threading and the various measuring/gauging requirements 7. Drilling/tapping processes 8. Familiar with carbide machining processes 9. Ability to comprehend complex mechanical drawings and blueprints 10. Strong math skills 11. Machinist or Tool & Die Apprenticeship